Industry News

BAUER-Pileco and ECA Head to CONEXPO/CON-AGG

We are just over 2 weeks away from the largest construction show in North America, CONEXPO/CON-AGG in Las Vegas. BAUER-Pileco and ECA already has trucks in route carrying their world-class Foundation Drilling Rigs to the show. They will also be showcasing one of their Duty-Cycle Cranes for the first time at this show. You can click HERE to link to their booth. Below is a list of some of the equipment that they will have on site:

unnamed (3)BAUER BG 11 H

Max. Drilling Diameter: 1.650 mm / 5.4 ft
Max. Drilling Depth: 40 m / 131.2 ft
Torque: 110 kNm / 81,132 lbf.ft
Engine Power: 122 kW / 164 hp
Max. Height: 16,5 m / 54.1 ft
Download Brochure HERE

 

unnamed (4)BAUER BG 24 H

Max. Drilling Diameter: 1.700 mm / 5.6 ft
Max. Drilling Depth: 58 m / 190.3 ft
Torque: 237 kNm / 174,802 lbf.ft
Engine Power: 313 kW / 420 hp
Max. Height: 21,9 m / 71.9 ft
Download Brochure HERE

 

BAUER MC 96 (with Pileco D100-13)
unnamed (4)Engine: CAT C18
Engine Power: 570 kW / 764 hp
Main Winches: 2 x 3
50 kN / 2 x 78,683 lbf
Boom Length: 45,4 m / 149 ft
Max. Lifting Capacity: 130 t / 286,601 lbs
Operating Weight: 120 t / 264,555 lbs
Download Brochure HERE
Download Hammer Spec Sheet HERE

 

unnamed (5)KLEMM 806-3G
Service Weight: 19,6 t / 41,006 lbs
Power Rating: 160 kW / 214 hp
Main Hydraulic Circuits: 2 x 240 l/min
(load sensing)                   2 x 63 gal/min

 

KLEMM 807-7F
unnamed (6)Service Weight: 26,0 t / 57,320 lbs
Power Rating: 220 kW / 295 hp
Main Hydraulic Circuits: 2 x 270 l/min
(load sensing)                   2 x 71 gal/min
1 x 120 l/min
1 x 32 gal/min

 

RTG RG 25 S
unnamedMax. Mast Height: 30,7 m / 100.7 ft
Max. Length Of Piles: 25 m / 82 ft
(depending on type of vibrator)
Mast inclination: 4 /15 / 4 °
(forward / backward / sideways)
Mast Turning Angle: 90 / 90 °
(right / left)
Crowd Force At Sledge: 400 kN / 89,924 lbf
(push / pull)
Allowable Torque: 275 kNm / 202,830 lbf.ft
Weight: 74 t / 163,142 lbs
(without counterweight)
Download Brochure HERE

Leave a Comment

Your email address will not be published. Required fields are marked *

*